7" X 1/4" X 7/8" T27 Olwyn Malu Dur y Ganolfan Isel
7" X 1/4" X 7/8" T27 Dur Center IselOlwyn Malu
Disgrifiad
| Sgraffinio: | Alwminiwm Ocsid A Corundum | Lliw: | Du |
|---|---|---|---|
| Caledwch: | R | Cyflymder gweithio uchaf: | 80 M/S |
| Maint Grit: | 24# | Iterm RHIF .: | JDAG1806022 |
| Cais: | Metel Fferrus A Holl Torri Metel Dur | Asiant Bondio: | Resin |
| Maint Arbor: | 7/8 Mewn | Math o ddisg: | Math Isel |
| Och: | Ongl Gorau i'w Ddefnyddio 90 ° | ||
| Golau Uchel: | Olwyn malu dur Canolfan ddirwasgedig, Olwyn malu dur T27, Olwyn malu dur 180X6.0X22.23 | ||
JZX 7" X 1/4" X 7/8" T27 Alwminiwm Dur Canolfan IselOlwyn Malu
Disgrifiad
MANYLEB
• Cyflymder cylchedol uchaf: 80 m/s
• Diamedr: Ø 180mm / 7"
• Diamedr tyllu: Ø 22 mm / 7/8"
• Trwch: 6.0 mm
• Deunydd y gellir ei brosesu: Metel
• Math o gynnyrch: Disg malu
Math 7 modfedd 180mm Math Mae 27 o Olwynion Malu Premiwm yn cael eu gwneud i fodloni Safonau ANSI ac EN.Wedi'u cynllunio gyda'r gweithredwr mewn golwg, mae'r olwynion malu hyn yn cael eu llunio ar gyfer tynnu stoc yn gyflym, wedi'i gydbwyso â bywyd gwasanaeth hir.Wedi'i gynhyrchu gyda haenau lluosog o wydr ffibr, resin Bakelite a grawn Alwminiwm Ocsid Ewropeaidd.May ei ddefnyddio ar amrywiaeth o swbstradau megis dur carbon a dur di-staenDefnyddio gydag offer ac ategolion wedi'u cynllunio ar gyfer olwynion malu canol isel eu hysbryd
CEISIADAU
Malu arwyneb, gwaith ar wythiennau weldio, llifanu weldiad ffiled, growtio, siamffrog, malurion.
Mae olwynion malu ac olwynion torri wedi'u gorchuddio â graean sgraffiniol a'u defnyddio ar gyfer cymwysiadau malu, torri a pheiriannu.Mae olwynion malu yn tynnu deunydd o fetel, gwydr, pren, brics neu goncrit.Mae olwynion torri i ffwrdd yn torri neu'n rhicio'r arwynebau hyn.Defnyddir olwynion gydag offer pŵer a pheiriannau diwydiannol fel llifanu ongl neu llifanu meinciau.
| Gwybodaeth olwyn torri: | |||
| Enw Cynnyrch | Olwyn Malu 7×1/4×7/8 | Sgraffinio | Alwminiwm ocsid a chorundum |
| Caledwch | Gradd R | Gradd Net | Gwydr ffibr wedi'i atgyfnerthu |
| Cyflymder gweithio uchaf | 80 m/s | Gwasanaeth OEM | Derbyniol |
| RPM | 8500 | Pecyn | Carton Kraft a Pallet |
| Maint graean | 46#,24# | Cod HS | 68042210 |
| Tystysgrif | MPA EN12413, ISO9001 | Llwytho Port | Tianjin neu arall |
Disg torri tenau 1.Super ar gyfer metel
| Disgrifiad o'r nwyddau | Rhif yr Eitem | Manyleb | Uned | PCS/CTN | NW/GW(KGS) | MAINT CARTON(CM) |
| Disg torri fflat ar gyfer metel 80m/s | FFAC0751095 | T41-75X1.0X9.5MM | PC | 800 | 9/10 | 34*17*17 |
| FFAC0751695 | T41-75X1.6X9.5MM | PC | 800 | 14/15 | 34*20*17 | |
| FFAC1001016 | T41-100X1.0X16MM | PC | 400 | 8.5/9.5 | 22*22*15.7 | |
| FFAC1002016 | T42-100X2.0X16MM | PC | 400 | 15/16 | 27.7*22*22 | |
| FFAC1151022 | T41-115X1.0X22.2MM | PC | 400 | 11/12 | 24.5*24.5*15.7 | |
| FFAC1151622 | T41-115X1.6X22.2MM | PC | 400 | 14/15 | 24.5*24.5*19.2 | |
| FFAC1152022 | T41-115X2.0X22.2MM | PC | 200 | 9.5/10.5 | 24.5*24.5*13.2 | |
| FFAC1251022 | T41-125X1.0X22.2MM | PC | 400 | 13/14 | 26.5*25.6*15.7 | |
| FFAC1251622 | T41-125X1.6X22.2MM | PC | 400 | 17/18 | 26.5*25.6*19.2 | |
| FFAC1252022 | T41-125X2.0X22.2MM | PC | 200 | 10.5/11.5 | 26.5*26.5*13.2 | |
| FFAC1501622 | T41-150X1.6X22.2MM | PC | 200 | 12/13 | 32*32*11.7 | |
| FFAC1502022 | T41-150X2.0X22.2MM | PC | 200 | 16.5/17.5 | 32*32*13.2 | |
| FFAC1801622 | T41-180X1.6X22.2MM | PC | 200 | 20/21 | 37.5*19*22.7 | |
| FFAC1802022 | T41-180X2.0X22.2MM | PC | 100 | 10.5/11 | 37.5*19*13.2 | |
| FFAC2301622 | T41-230X1.6X22.2MM | PC | 50 | 8/9 | 24*24*11.7 | |
| FFAC2302022 | T41-230X2.0X22.2MM | PC | 100 | 18.5/19.5 | 24*24*25.7 |
Disgiau torri 2-bwrpas cyffredinol
| Disg torri fflat ar gyfer Mulit 80m/s | FMC0751009 | T41-75X1.0X9.5MM | PC | 800 | 9/10 | 34*17*17 | 10,000 |
| FMC0751695 | T41-75X1.6X9.5MM | PC | 800 | 14/15 | 34*20*17 | 10,000 | |
| FMC1001016 | T41-100X1.0X16MM | PC | 400 | 8.5/9.5 | 22*22*15.7 | 10,000 | |
| FMC1002016 | T41-100X2.0X16MM | PC | 400 | 15/16 | 29.7*22*22 | 10,000 | |
| FMC1151022 | T41-115X1.0X22.2MM | PC | 400 | 11/12 | 24.5*24.5*15.7 | 10,000 | |
| FMC1151622 | T41-115X1.6X22.2MM | PC | 400 | 14/15 | 24.5*24.5*19.2 | 10,000 | |
| FMC1152022 | T41-115X2.0X22.2MM | PC | 200 | 9.5/10.5 | 24.5*24.5*13.2 | 10,000 | |
| FMC1251022 | T41-125X1.0X22.2MM | PC | 400 | 13/14 | 26.5*25.6*15.7 | 10,000 | |
| FMC1251622 | T41-125X1.6X22.2MM | PC | 400 | 17/18 | 26.5*25.6*19.2 | 10,000 | |
| FMC1252022 | T41-125X2.0X22.2MM | PC | 200 | 10.5/11.5 | 26.5*26.5*13.2 | 10,000 | |
| FMC1501622 | T41-150X1.6X22.2MM | PC | 200 | 12/13 | 32*32*11.7 | 10,000 | |
| FMC1502022 | T41-150X2.0X22.2MM | PC | 200 | 16.5/17.5 | 32*32*13.2 | 10,000 | |
| FMC1801622 | T41-180X1.6X22.2MM | PC | 200 | 20/21 | 37.5*19*22.7 | 10,000 | |
| FMC1802022 | T41-180X2.0X22.2MM | PC | 100 | 10.5/11 | 37.5*19*13.2 | 10,000 | |
| FMC2301622 | T41-230X1.6X22.2MM | PC | 50 | 8/9 | 24*24*11.7 | 10,000 | |
| FMC2302022 | T41-230X2.0X22.2MM | PC | 100 | 18.5/19.5 | 24*24*25.7 | 10,000 |
Ysgrifennwch eich neges yma a'i hanfon atom
