Tynnu Glân Alwmina 180mm Sgraffinio Flap Disg Olwyn
Tynnu Glân Alwmina 180mm Sgraffinio Flap Disg Olwyn
Disgrifiad
| Sgraffinio: | Alwmina ocsid | Lliw: | Du |
|---|---|---|---|
| Caledwch: | R | Cyflymder gweithio uchaf: | 80 M/S |
| Maint Grit: | 36-40-60-80 | Iterm RHIF .: | FZA180X22 |
| Cais: | Metel Fferrus Ac Inox | Asiant Bondio: | Wedi'i Bondio â Resin |
| Maint Arbor: | 7/8 Mewn | Math o ddisg: | Math Conigol |
| Golau Uchel: | Olwyn Disg Fflap 180mm, Olwyn Disg Fflap 80M/S, Disg Fflap Alwmina 180mm | ||
Glaswelltir hebei alwmina sgraffiniol 180mm Sgraffinio Disg Flap Dileu yn lân
Dewis arall perfformiad uchel yn lle disgiau sandio gyda'r fantais dros ddisgiau malu canol isel ar ddalen fetel ysgafn lle mae gorffeniad arwyneb yn bwysig.
• Diamedr Disg 180mm• Conigol Math Disg (Math 29)• Safonau/Cymeradwyaeth a Gynhyrchwyd Yn ôl EN13743• Uchafswm Cyflymder Gweithredu 8,600rpm• Deunydd Sgraffinio Alwminiwm Ocsid
Mae Disg Flap Alwminiwm Ocsid 180mm 40G yn ddelfrydol ar gyfer gwaith tynnu stoc trwm, tynnu weldio, malu a glanhau.Mae'r ddisg yn gynhyrchiol cost-effeithiol iawn ar gyfer swyddi llai, gan ddarparu gorffeniad cyson am y gwerth gorau.Mae'r disg fflap yn addas i'w ddefnyddio ar ddur, dur di-staen, alwminiwm, haearn bwrw a'r rhan fwyaf o fetelau eraill.Os ydych chi'n dymuno creu gorffeniad llyfn a chael gwared ar grafiadau ar ôl gosod y disg hwn, argymhellir dilyn gyda graean uwch (80-120) ar gyfer triniaeth arwyneb terfynol.
| Gwybodaeth olwyn torri: | |||
| Enw Cynnyrch | Disgiau fflap 7 modfedd ar gyfer alwmina | Sgraffinio | sirconiwm ocsid |
| Caledwch | Gradd R | Safon Diogelwch | EN13743 |
| Cyflymder gweithio uchaf | 80 m/s | Gwasanaeth OEM | Derbyniol |
| RPM | 8600 | Pecyn | Carton Kraft a Pallet |
| Maint graean | P36/P40/P60/P80 | Cod HS | 68042210 |
| Tystysgrif | MPA, ISO9001, ISO14001 | Llwytho Port | Tianjin neu arall |
| Manyleb | Grit | Uned | Qty/blwch | Qty/Carton | NW | GW | carton (MM) |
| 100*16MM | 36# | PC | 50 | 200 | 12 | 13 | 530*250*250 |
| 40# | PC | 50 | 200 | 11 | 12 | ||
| 60# | PC | 50 | 200 | 10 | 11 | ||
| 80# | PC | 50 | 200 | 9 | 10 | ||
| 115*22MM | 36# | PC | 50 | 200 | 17 | 18 | 630*270*270 |
| 40# | PC | 50 | 200 | 17 | 18 | ||
| 60# | PC | 50 | 200 | 16 | 17 | ||
| 80# | PC | 50 | 200 | 15 | 16 | ||
| 125*22MM | 36# | PC | 50 | 200 | 21 | 22 | 680*290*280 |
| 40# | PC | 50 | 200 | 20 | 21 | ||
| 60# | PC | 50 | 200 | 19 | 20 | ||
| 80# | PC | 50 | 200 | 18 | 19 | ||
| 150*22MM | 36# | PC | 25 | 100 | 17 | 18 | 350*350*300 |
| 40# | PC | 25 | 100 | 16 | 17 | ||
| 60# | PC | 25 | 100 | 15 | 16 | ||
| 80# | PC | 25 | 100 | 14 | 15 | ||
| 180*22MM | 36# | PC | 25 | 100 | 22 | 23 | 400*400*300 |
| 40# | PC | 25 | 100 | 21 | 22 | ||
| 60# | PC | 25 | 100 | 20 | 21 | ||
| 80# | PC | 25 | 100 | 19 | 20 |
Disgiau torri a malu sgraffiniol eraill y gallai fod gennych ddiddordeb fel isod,
| Disgrifiad o'r nwyddau | Rhif yr Eitem | Manyleb | Uned | PCS/CTN | NW/GW(KGS) | MAINT CARTON(CM) |
| Disg torri fflat ar gyfer metel 80m/s | FFAC0751095 | T41-75X1.0X9.5MM | PC | 800 | 9/10 | 34*17*17 |
| FFAC0751695 | T41-75X1.6X9.5MM | PC | 800 | 14/15 | 34*20*17 | |
| FFAC1001016 | T41-100X1.0X16MM | PC | 400 | 8.5/9.5 | 22*22*15.7 | |
| FFAC1002016 | T42-100X2.0X16MM | PC | 400 | 15/16 | 27.7*22*22 | |
| FFAC1151022 | T41-115X1.0X22.2MM | PC | 400 | 11/12 | 24.5*24.5*15.7 | |
| FFAC1151622 | T41-115X1.6X22.2MM | PC | 400 | 14/15 | 24.5*24.5*19.2 | |
| FFAC1152022 | T41-115X2.0X22.2MM | PC | 200 | 9.5/10.5 | 24.5*24.5*13.2 | |
| FFAC1251022 | T41-125X1.0X22.2MM | PC | 400 | 13/14 | 26.5*25.6*15.7 | |
| FFAC1251622 | T41-125X1.6X22.2MM | PC | 400 | 17/18 | 26.5*25.6*19.2 | |
| FFAC1252022 | T41-125X2.0X22.2MM | PC | 200 | 10.5/11.5 | 26.5*26.5*13.2 | |
| FFAC1501622 | T41-150X1.6X22.2MM | PC | 200 | 12/13 | 32*32*11.7 | |
| FFAC1502022 | T41-150X2.0X22.2MM | PC | 200 | 16.5/17.5 | 32*32*13.2 | |
| FFAC1801622 | T41-180X1.6X22.2MM | PC | 200 | 20/21 | 37.5*19*22.7 | |
| FFAC1802022 | T41-180X2.0X22.2MM | PC | 100 | 10.5/11 | 37.5*19*13.2 | |
| FFAC2301622 | T41-230X1.6X22.2MM | PC | 50 | 8/9 | 24*24*11.7 | |
| FFAC2302022 | T41-230X2.0X22.2MM | PC | 100 | 18.5/19.5 | 24*24*25.7 | |
| Disg torri fflat ar gyfer metel 80 m/s | FFAC3003225 | T41-300X3.2X25.4MM | PC | 25 | 13/14 | 30*30*9.5 |
| FFAC3004025 | T41-300X4.0X25.4MM | PC | 25 | 14/15 | 30*30*11 | |
| FFAC3503225 | T41-350X3.2X25.4MM | PC | 25 | 17/18 | 35.5*35.5*9.5 | |
| FFAC3504025 | T41-350X4.0X25.4MM | PC | 20 | 17/18 | 35.5*35.5*9.5 | |
| FFAC4003225 | T41-400X3.2X25.4MM | PC | 25 | 22/23 | 40*40*9.5 | |
| FFAC4004025 | T41-400X4.0X25.4MM | PC | 20 | 22/23 | 40*40*11 |
